Site is working in test mode.

We will be happy to answer all your questions by phone +421 940 357 277 or email sk@pipl.eu

Free delivery from 100 EUR

Cart
Sign in to see products added on other devices
Cart-
No goods for comparison
Empty
Comparison

Partial arming or Ajax night mode - a useful feature of the alarm system

Partial arming or Ajax night mode - a useful feature of the alarm system

Ajax is a modern and reliable alarm system for the home, which consists of a different number of sensors and adapts to the specific home or office. Ajax alarm system has deep settings that allow you to create a lot of scenarios and individualize the operation of the alarm system.

One of the features is the "night mode" or "partial guard", which allows you to move around at night without any problems and at the same time to monitor the safety.

The essence of partial mode in Ajax

When the owner is not at home, the alarm system is usually in active mode. It has all the sensors and analyzers working, continuously studying the surroundings. When you come home, the alarm is usually disarmed. The sensors are not triggered by opening doors or motion.

Night mode is a special format of operation, in which you can provide partial operation of the devices for safety during sleep. In this case, several tracking devices are functioning, and it is not difficult to move. Usually, the active devices remain active:

  • door and window opening sensors;
  • devices that monitor the breakage of glass and other surfaces;
  • motion analyzers on the street and in unused rooms.

Thus, by activating night mode, you can create a safe environment, leaving free, for example, the route from the bedroom to the bathroom or the kitchen. You can sleep absolutely peacefully, without worrying about a visit from an intruder. The sensors that are left active are guaranteed to work. This is especially useful if there are pets in the house that can be recognized as moving objects.

Different operating scenarios can be set up. Thanks to the night mode, you can not be afraid of intrusion into the home of unauthorized persons, because when the sensors are triggered, the alarm will be given immediately.

Partial Guard Setup

As with other setting procedures, partial arming is not difficult, as you can use the built-in functions to do so. In particular, the Ajax application, which requires a separate configuration of each of the sensors:

  1. The Ajax program is started.
  2. Opens the tab with all devices and selects a particular sensor.
  3. The settings are started, in which the night mode is activated.

There you can also configure the reaction of the sensor to an irritant. For example, you can disable the siren or leave it working, but not transmit a signal to the alarm panel. You can also enable the standard night mode by simply selecting the appropriate option in the "Control" tab.

If you have a key fob to control the alarm system, you can simply click on the button with the unfinished circle symbol. It is located in the left lower quarter of the device and automatically activates all night sensors, leaving unnecessary systems unused.

The keypad, which is mounted on the wall, is also suitable for setting the partial arming mode. To do this, enter the password and press the leftmost button, which automatically starts the setting of the night mode.

It is also possible to do without entering a password. However, this requires making additional settings in the KeyPad. You must select the option that activates the security without a password. Thus, just one press of the button will switch the alarm system to a special space monitoring mode.

The advantages of night mode

vazhnost-ukr-1024x576.jpg (70 KB)

The opportunity to put the room under partial protection has its own advantages, which will especially appeal to connoisseurs of comfort. Among the pluses of night mode:

  • easy setup without unnecessary steps;
  • the ability to move around the house without sacrificing the level of security;
  • elaborate settings with the ability to develop an individual scenario;
  • mode control both using the application and the keyboard or branded key fob.

Many people buy Ajax security modules because of the wide range of options available. Each sensor can be adjusted for specific needs to provide maximum convenience and reduce the risk of accidental triggers.

To find out how to activate the night mode of protection, you can use the official instruction, which comes with the devices. There is also an opportunity to get professional advice from Pipl.ua specialists. This will make your purchase conscious and useful. We are working to ensure that each customer was reliably protected.

How to find out the default password for Wi-Fi cameras using the IMOU example
AJAX Relay and WallSwitch overview and wiring instructions
Comments0
Up
A saving error!
The data is saved successfully!
Copied to the clipboard
The products are added to the cart
The products are added to "Wish list"
The goods are added for comparison